Depending on the kind of mold you are dealing with, and at which it is found, mold removal can be a tricky or straightforward issue. Mold can occasionally grow in hidden locations, and until it can be removed it must be tracked down during identification or mold testing. Frequently it’s behind walls, under carpets, or in other inaccessible locations, making the job of eliminating it that much more difficult. If it’s a particularly dangerous type of mold, such as Stachybotrysblack or black mold, then eliminating it is a job best left to professionals. Improper handling of black mold may cause the spores to become airborne, and possibly be breathed in by you or a member of your family.
Before mold can be removed, the source of moisture which the mold thrives on must be stopped. Otherwise, the mold removal procedure will be in vain. Roof or plumbing leaks are frequently the culprit, and these must be mended. If the event had been a flood, then often the process is to cut off the affected regions of wallboard, carpet, paneling, etc. The place should be dried using a dehumidifier or heating supply. The usage of high-powered fans isn’t encouraged as these may lift the spores and disperse them throughout the house. If the source of moisture is moisture, the solution is more complicated, as this is a recurring issue that needs to be solved until the mold can be treated. Sometimes it may be an improperly tuned air conditioning system that needs to be adjusted. Find out more here.
Many surface molds that grow in showers and round bathrooms can be managed easily with a simple bleach solution or any number of anti-mold products on the marketplace. If the mold growth is extensive, it is a good idea to put on a respirator, rather than with a HEPA filter, when working on the mold. Most commercial mold killer products are spray-on kinds, and following the application, the mold should be scrubbed, with care taken not to breathe in the spores.
This mold is deemed dangerous, as exposure to its spores was known to cause severe respiratory problems for many, particularly those with a depressed immune system. This mold grows mostly on cellulose-type substances, such as wood and wallboard, which explains why it often thrives in a modern home. Mold removal professionals handle black mold as an environmental threat. Wallboard, carpet, and paneling are usually completely removed, and the rest of the wood studs are sprayed with a powerful chemical representative. The mold is scrubbed off, and distinctive vacuums with HEPA filters are used to clean up the residual residue. From time to time, air compressors are then run in the household several times to clean up the air in the house.
Controlling the humidity level in a home is the key to preventing recurring mold problems. Leaks and flooding will take place from time to time, but if the issue is caught immediately then the area will dry out until the mold has a chance to grow. But persistent humidity, even from such apparently minor things as ‘pipe sweat’ or steam condensation, could enable mold to grow. Click here to learn more.
Professional mold removal is an expensive proposition for most homeowners. However, mold growth left unchecked can result in serious health consequences for you and your loved ones. It is important to care for the issue of mold as a very severe one and also to take the right steps in eradicating it from your house. The implications to your health are too severe to ignore. If you suspect you might have a mold problem in your home, then get mold testing done and if desired, mold removal. The benefit for your health is well worthwhile.
For mold removal solutions, contact PuroClean now!
As you can see, mold is a serious, often misunderstood issue that can grow much harder if it is not cared for correctly. That is why PuroClean franchisees follow the IICRC criteria for professional mold remediation and eliminate mold utilizing the latest, most efficient techniques. Visit this website for more information.